Has your itel A16 OR A16 plus stock on WiFi in a layman's understanding which in other word known as factory reset protection(FRP) then your are on the right place. in our today's article we shall, we shall quide you through a step by step procedure on how to bypassing your itel stock on WiFi in a matter of no time just follows us step after step in other not miss any step.    
       

           


     Factory data reset( FRP) is a new hightech security option

     In our daily life today we usually make the mistake of formatting our smart phone without signing out our gmail address from our devices and when this is done your device boot-up and get stock on WiFi. and at times since we lack the technical know to create or manage our password we usually forget our login details and therefor become stranded as in what to do to get back to our to our normal friendly GUI 

     today we give step by step procedure on how to unlock your device from the FRP lock stay tune and follow our step and free your device from the FRP lock.   

Ø TOOLS NEEDED.

§  SPD UPGRADE TOOL.

§  ITEL A16 FRP RESET FILE.

§  SPD USB DRIVERS.

§  ITEL A16 plus FRP reset file.

§  SPD NPI USB DRIVERS.

 

 

Ø STEPS TO IN BYPASSING ITEL A16 AND ITEL A16 PLUS FRP

 

·         Turn of your device and remove the battery and insert it back

·         Launched spd upgrade tool as seen on the picture below


·         Once you have launched the program, click on the first gear icon to load the reset file into the flashing tool as shown in the image below


·         Now prepare your usb driver and installed require spd driver to enable the program detect your device and reset it

·         Now click on the greater than icon which is the 3rd icon and connect your device holding down boot keys vol- or vol+ test the keys and the flashing will begin

·         Make sure not to disconnect your device wait for it to finish then you see a green passed on the screen remove your device and reboot it


·         You FRP should now be reseted you free to use your device normally again

Ø  FOR ITEL A16 PLUS FRP.

·         turn off your A16 plus device

·         Move ahead and still launched SPD UPGRADE TOOL and seen from the previous steps above

·         Click on the gear icon which is the first icons to load the ITEL A16 plus Frp reset file in to flashing software

·         Press the arrow icon which is the 3rd icon and connect your device holding down boot keys as short listed above to start flashing

·         Do not disconnect your device wait for the process to complete by showing a green passed on the software which indicate flashing done

·         Disconnect your device and reboot, your device should now be free from the FRP security.

 

Hope this article was able to help someone out there drop your comment in the comment box beneath for any inquiry.

  

   

  


     DOWNLOAD ITEL A16 FRP RESET FILE 👉  


     DOWNLOAD ITEL A16 PLUS FRP RESET FILE   👉 




Download Tutorial PDF