Have you been buying customers phone that you by mistakenly destroyed today I give a solution to all that? Miracle thunder edition will help you read and save your customer android system so that you rewrite the previous system if something goes wrong when you try to flashed another system either to fixed system hang on logo, repair recovery. Img, or flashed to remove FACTORY RESET PROTECTION(FRP). Miracle box give you an opportunity to restore previous system and put the device to it previous state.
  Miracle thunder 2.82 thunder edition gives you an easy way to read and save your current system in the form of scatter file .txt for MEDIATEK processors. The following steps below will quid you on how to read and save your MTK firmware for later use.

        To read your android system you do the following. 

  • Locate and launch your Miracle Thunder 2.82 thunder edition. 
  • wait for it to load and when the program displays the dashboard.
  • Once on the miracle dashboard, select MTK tab and click on service.
  • On the service tab click READ found on the second row before bad software.
  • Now click on boot select and choose 4th boot (auto connect) that if you don’t know the particular chip type to select.
  • Click on ALL and select backup read in other for miracle to save the read file to your computer.
  • Now click on the save file panel and click on the yellow folder to locate where you wan the system to keep the read system.
  • Once that is done go down and click on start button to begin the reading process just seat back and wait for the process to complete.
  • From the process bar once it 100% you get a message saying reading complete and where it has been saved in now you can go there copy and keep in a safe place.
  • WITH MTK device your will appear in this form after you read the full system.



  WHY READ YOUR DEVICE SYSTEM FIRMARE? 

  • The main reason behind ROM reading is that you might go online to download that particular firmware and tor the whole online and don’t fine the specific firmware to your android device. 
  • You might also want to read your system in the case where you don’t want to update your device firmware so you read and keep so that you can rewrite your MTK device in case your device firmware crashes.
  • As mention above, you could be a technician of mobile device software maintenance reading your customers phones will help you so that you would get in to problems with he or she when you must have flashed a wrong firmware and the device is no more coming on. The system you read will safe you because all you need to do is write the previous system so that the device should at list turn on. Then you could now explain to the customers and giving him back his phone in the state he or she gave you. 


WRITING THE READ SYSTEM. 

     Once your system has been successfully read and saved all you need to do just head to the write section as shown on the picture. Now let see how to write your system from the read ROM in to the brick device to restore it to it previous state.  
  • To begin the writing go back to the MTK tab and select write which the option right next to the read option.
  •   Now allow the boot select to 4th boot Auto connect and go down to format all(android) and chick the box. This option will first of all format the present system then installs the read version. 
  • You could skip the preloader if you like but I recommend you install everything to avoid errors.
  • Now click on the folder which is found towards the end of the line to locate and choose your scarter.txt file found in the rom as seen from the picture.
  • After choosing the scatter file click on to import the rest of the system file in to miracle box software.
  • After the system has been imported you see all device info by the left showing the android version chip type and more. 
  • Now click on start and connect your device via USB cable and holding down the boot key either vol+ or vol- to begin flashing, now you wait for the phone to be flashed when it gets to 100% the success message will be displayed at the bottom. 
  • Now unplug your device remove the battery and insert back again and try to power on now your device should be ok now or better still the device will be back as before. 


















CONCLUSION.  
    Miracle box is a great and helpful tool for technicians who do mobile software maintenance the application has been designed to give the user easy navigation from one mobile device platform to the next. just download the program from the link provided below and enjoy. Thank for visiting my site hope this was helpful to you. 

Download Tutorial PDF