Today we
shall be looking at a solution to most typical errors of most ITEL smartphones
itel hang on LOGO is a rampant system error that occur on most ITEL smartphone
and if your are reading this post then you are on the right place today we
shall be giving you some simple step by step method on how to solve this system
error. Itel Hang on Logo is a situation where your device can not boot pass the
LOGO which is why your ITEL device will hang on LOGO leaving your device half
boot continue reading this post you will find the solution to your problems.
To solve this problem of itel hang of Logo
we need to flash the system but not with the normal upgrade tool but with a
more similar tool which we shall provide for you. This tool will repair all
type of smartphones provided it an SPD PROCESSOR this software will repair your
device and make it to boot completely to screen this method is well testing and
working so continue reading you will find all the steps make sure not to skip
any step.
STEP BY STEP METHOD TO SOLVE ALL ITEL(SPD) HANG ON LOGO.
To solve this problem, you will need to
download some simple two files that will help you flash your phone back to
functional state. So, stay tuned and read till the end.
1.
Before we start the process of repairing your device you
need to download and Install the latest SPRD_NPI_USBDriver_1.4
for your device below you will find the various link to get the files.
SPRD_NPI_USBDriver_1.4 👉LINK1
👉 LINK2 👉 LINK3
2.
Now you will need to get the itel hang on logo flasher which
hell restore you device to normal state below you will find the download link
of itel hang on logo flasher tool
ITEL LOGO HANG FLASHER TOOL 👉 LINK 1 👉 LINK2 👉LINK3
3.
Now once have downloaded all the software the first thing
you will have to do after downloading is installing the drivers you downloaded
then secondly you will extract the flasher to your desktop.
4. Run the FactoryDownload.exe found inside the tool Bin folder then load the .PAC file make sure you have the latest firmware of your device.
5.
Once you connect
your device to the flasher holding down the boot keys you press start and wait
for the tool to flash the firmware in to your device.
6.
Once you see the green passed button disconnect your device
and remove the battery then insert it back and power up your device your device
should be OK now it should be able to boot to screen now.
hope