Hello, mate in this article we shall be
looking at the possible ways to bypass privacy protection passwords on android
devices. This was a feature that was incorporated into the system of most late
or earliest android devices which run on Android OS 4.4kitkat to android
marshmallow it was designed to restrict unauthorized users from accessing and
using other people's devices with that the accepted pin of the device. This security feature would take
effect if it is enabled on the setting page of your smartphone.
What if your device accidentally enters into the mode or you forgot your
device pin and you are locked out of your device? Then this article is for you to read till the end you might get a solution to your problem. So, don’t worry we
shall drop different methods just continue reading you get the method that will
work for you.
METHOD 1.
HOW TO BYPASS PRIVACY PROTECTION PASSWORD USING MIRACLE BOX
from the image below you can use the read option to read your device's anti-thief code so that you won't spend time going through all the steps below to remove this privacy protection password. this option on miracle will display the forgotten pin which you lastly used on your device before it went to security lock.
We shall unfold some step-by-step processes on
how to disable privacy protection passwords using miracle box.
1.
Visit the link to download miracle box thunder
edition from our site click HERE to
get it and also click HERE to get
miracle driver installation.
2.
Once you have downloaded all the tool above,
extract them to your desktop
3.
Once your extraction is complete install first
the miracle driver then install miracle thunder by double-clicking on the
setup file found in the extracted folder and follow the onscreen wizard to
install miracle box.
4.
Once your program is installed, locate the
shortcut found on your desktop and launch it wait for it to display.
5.
Now turn off your privacy protected device and
remove the battery, reinsert the battery again.
6.
Now connect your USB cable to your computer and
go to the open miracle and select clear anti thief password. Then connect your
device by holding down boot keys power, or vol-, vol+ to boot the phone in to
download mood for miracle to detect your device and erase the privacy
protection feature which was enable. Now click on start to get process running
you will have to wait and be careful not to disconnect your device during the
process. Your device can get break if you do.
7.
Once the process is completed, unplug your device
remove the battery reinsert it back and restart your device the code should be
removed.
If the above method did not work
for you continue reading you get the method that will work for you.
METHOD
2.
This method relies on getting the
original sim card that was use to enable this feature.
1.
Power
off your device and insert the original sim card that was used to setup the
security feature in your phone.
2.
Now
power on your device. Once your device power-up go to device setting page.
3.
Locate
and select the security option found in setting open it and click on setup SIM
card lock.
4.
Locate
the anti-thief or anti thief security click on it to disable the feature it done
your device is unlocked without any software.
5.
Now
your device can take any sim card once the feature is disabled.
METHOD
3.
Method three of our article relies
on flashing your device with STOCK firmware to clear the anti-thief security
feature which is enable in your device.
1. To
flash your device, google your device model number for example LG stylo2 plus
firmware download or itel S32 firmware download.
2. Google
will provide you with various websites where you can get your firmware from. Visit
the site until you get a download link for your firmware. For LG firmware visit lg-firmwares.com.
or visit https://androidmtk.com/download-itel-stock-rom
to get itel firmware and needrom.com and naijarom.com to get MTK firmwares.
3. Once
have downloaded your firmware what you need now is the flashing tool for your
device for LG you need LGUP TOOL which you can get from google for itel using
SPD processor you will need upgrade download tool and for itel using the MTK processor
will need SP FLASH TOOL OR MIRACLE BOX.
4. Once
you have your tools for flashing simply install the flash tool then import your
firmware in to the flashing tool using.
5. Once
your firmware is imported in to the flash tool, connect your device to the
flash and holding down boot key so that the flash tool detects your device and
start the process of flashing the new firmware into your device to erase the
privacy protection which was enable on the device.
We believe with all the method one
can help your fix your device and get it up running.
CONCLUTION.
OUR ARTICLE SHOULD NOT BE USED ON STOLEN PHONES AS WE DON’T ENCOURAGE IT OUT POST IS FOR EDUCATIONAL PURPOSE ONLY. BOOKMARK OUT PAGE SO THAT YOU GET LATEST UPDATE FROM US THANKS.